Handling
The phenolic core of Veneer Laminate facilitates the handling of large sheets, but take care when lifting and carrying the product: if handled carelessly, splitting along the grain may occur.
Carry Veneer Laminate sheets vertically, and never slide fabricated panels on the decorative face.
Storage
Storage conditions should be the same as those recommended for conventional decorative laminates (18°C - 25°C and 50% - 60% relative humidity).
Store sheets flat and horizontal, back to back with the top sheet turned face-down. Place a cover board over the stack to prevent top board curl.
Protect sheets from sunlight and moisture, and never store directly on the floor. As with all real wood products, a slight overall colour change may occur over time. Do not allow partial exposure to light which may cause uneven colour change.
Conditioning
Veneer Laminate is 50% real wood, so it is more susceptible to the effects of changes in humidity than are conventional laminates. In common with other wood products, it will expand in damp conditions and shrink in dry conditions. Pre-conditioning is therefore essential.
Immediately before bonding the Veneer Laminate sheets, store substrates and backing veneers together in conditions similar to the anticipated end-environment for 8 to 10 days. Use separators to ensure maximum air circulation around the materials.
|
